Skip to content
EuroAsia
Enlarge image: Diesel forklift RF30
Enlarge image: Diesel forklift RF30 – photo 2
Enlarge image: Diesel forklift RF30 at work
Enlarge image: Diesel forklift RF30 at work
Enlarge image: Diesel forklift RF30 – multi-cylinder water-cooled diesel engine
Enlarge image: Diesel forklift RF30 – high-performance hydraulic cylinders
Enlarge image: Diesel forklift RF30 – high-strength mast
Enlarge image: Diesel forklift RF30 – wiring harness

Forklifts

Diesel forklift RF30

Available

A 3000 kg diesel forklift with a 37 kW 4D27ZG31 engine, a 2 + 2 transmission and a 3000 mm lift height – up to 20 km/h and fuel-saving hydraulics.

ID: RF30

The Rippa RF30 is a diesel forklift with a 3000 kg rated capacity (500 mm load centre) and a 3000 mm lift height, powered by a 37 kW 4D27ZG31 engine with a two-forward, two-reverse transmission. It travels at up to 18 km/h laden and 20 km/h unladen. Powerful, well built and durable, it is made for warehousing, manufacturing and logistics.

Multi-cylinder water-cooled diesel engine

A large multi-blade fan at the front of the engine, belt-driven, keeps the engine at its ideal operating temperature even during long periods under heavy load.

High-performance hydraulic cylinders

With a high-quality sealing system and precision-machined parts, the cylinders carry heavy loads and push and pull smoothly. The seals come from Japan's NOK.

High-strength mast

Made of high-strength steel with a reinforced structure, the mast is very rigid and resists twisting and bending, so it stays stable under heavy loads. Independent side rollers keep the gap between the channels small, and branded chains carry more than five times the load.

Wiring harness

The wiring harness carries sensor signals – oil pressure and coolant temperature – to the control unit and delivers its commands to the electronic fuel injectors.

Fuel-saving hydraulics

Hydraulics taken from Rippa's construction machinery, with a load-sensing variable-displacement pump, supply only as much oil as the job needs – no losses and no extra load on the engine. Loads can be raised precisely even at low engine speed, attachments run smoothly and fuel consumption drops by up to 20% (Rippa's measurements).

Brakes and steering

The hydraulic brakes stop powerfully, quickly and smoothly, and Rippa's cushioning valve matches the braking force to the pressure on the pedal, giving the operator better control. Fully hydrostatic power steering with a small steering wheel works even at standstill and makes manoeuvring with a load in tight spaces easy.

Safety and comfort

An alarm sounds if the parking brake is not applied, the engine starts only with the direction switch in neutral and the brake pedal pressed, and the overhead guard meets ANSI/ITSDF B56.1. A dual floating mounting absorbs vibration from the engine and the ground, the full-suspension seat has a retractable seat belt, and the exhaust and the radiator's hot air are directed away from the operator. A wide-angle centre mirror is optional.

Easy servicing

The engine hood opens wide and locks, the floor plate comes off completely, and the filters and radiator are easy to reach and clean. The main hydraulic connections use O-ring face seals and the electrics waterproof connectors; hydraulic and electrical lines run separately for reliability and easier servicing.

Power type
Diesel engine
Operating weight
4320 kg
Axle load, laden (front / rear)
6480 / 920 kg
Axle load, unladen (front / rear)
1730 / 2580 kg
Rated operating capacity
3000 kg
Load centre distance
500 mm
Max. lift height
3000 mm
Free lift
100 mm
Max. travel speed (laden / unladen)
18 / 20 km/h
Lift speed (laden / unladen)
350 / 500 mm/s
Lowering speed (laden / unladen)
550 / 450 mm/s
Max. tractive force
17 kN
Gradeability (laden / unladen)
15 / 20%
Turning radius (outside)
2407 mm
Turning radius (inside)
1582 mm
Min. aisle width for a right-angle turn
2507 mm
Overall height, mast extended (with load backrest)
4260 mm
Overall height, mast lowered
2081 mm
Load backrest height (above the forks)
1227 mm
Overhead guard height
2186 mm
Seat to overhead guard
1022 mm
Length without forks
2852 mm
Overall width
1234 mm
Front overhang
455 mm
Rear overhang
498 mm
Min. ground clearance
174 mm
Towing pin height
310 mm
Wheelbase
1800 mm
Wheel track (front / rear)
1030 / 992 mm
Wheels, front / rear (x = driven)
2x / 2
Tyre type
Pneumatic tyres
Front tyre size
28×9-15
Rear tyre size
6.50-10
Mast tilt (forward / backward)
6° / 12°
Fork size (length × thickness × width)
1070 × 45 × 120 mm
Fork spread, outside (max / min)
1100 / 240 mm
Engine
4D27ZG31
Engine power
37 kW
Horsepower
50 hp
Transmission
2 forward / 2 reverse gears
Service brake
Hydraulic
Parking brake
Mechanical

Similar products

Forklifts

Electric forklift RF15E

The Rippa RF15E is an electric forklift with a 1500 kg rated capacity (500 mm load centre) and a lift height of 3000 mm. Its drive and hydraulic motors are AC, powered by a 60 V battery of five maintenance-free 12 V batteries. It runs quietly with no exhaust fumes, and at 2200 mm long without forks and with a 2300 mm turning radius it moves easily through warehouses, production halls and logistics centres. Thickened battery wiring Thicker battery cables cut resistance and energy loss, so current flows more efficiently and the power output stays stable. The cables run cooler, which prevents overheating and extends the life of both the wiring and the battery. Reinforced mast made by Rippa The high-precision reinforced mast, made in Rippa's own factory, is stronger and more stable, so the forklift works reliably even with heavy loads. Loads rise smoothly without swaying, which improves safety and productivity, and branded chains carry more than five times the load and come with third-party test reports. LCD instrument panel The smart display shows the operating parameters in real time – the operator and the service technician see the forklift's status at a glance, and a low-battery warning reminds you to recharge. Cylinders with imported seals The hydraulic cylinders use imported seals that seal well and last long: they stop oil leaks, reduce wear and withstand high pressure, heat and corrosion, so the cylinders keep working reliably even in demanding conditions. All-AC drive The drive and hydraulic motors are AC: there are no brushes to inspect or replace, so maintenance costs less, and compared with DC motors they are more efficient, last longer and run longer on one charge. An electric forklift has fewer moving parts than a diesel or LPG one, and electricity costs less than fuel. Comfort and safety Wide armrests, deep non-slip steps, a thumb-operated direction switch and a power disconnect beside the seat make the work easier, and the steering column tilts. An alarm sounds if the parking brake is not applied, a speed-limiting valve and a shut-off valve protect the hydraulics and the operator, and LED work and warning lights, a seat with a seat belt and puncture-proof solid tyres complete the equipment.

Forklifts

Electric forklift RF20E

The Rippa RF20E is an electric forklift with a 2000 kg rated capacity (500 mm load centre) and a lift height of 3000 mm. Its 4 kW drive and hydraulic motors are AC: brushless, they use less energy and run longer on one charge of the 60 V battery without losing performance. Quiet and free of exhaust fumes, it suits logistics, warehousing and industrial production. Thickened battery wiring Thicker battery cables cut resistance and energy loss, so current flows more efficiently and the power output stays stable. The cables run cooler, which prevents overheating and extends the life of both the wiring and the battery. Mast side rollers The mast uses independent side rollers, so the gap between the mast channels is small: the channels do not wear and the mast does not develop play even after long use. Branded chains carry more than five times the load and come with third-party test reports. LCD instrument panel The smart display shows the battery charge and reminds you to recharge in time, monitors the travel speed to keep the forklift within a safe range, and shows an error code when a fault occurs – troubleshooting is faster and downtime shorter. Cylinders with imported seals The imported cylinder seals withstand high pressure, heat and corrosion, so the cylinders keep working steadily even under intensive use. This lowers maintenance costs and raises the forklift's working capacity in logistics, warehousing and manufacturing. Lower running costs An electric forklift has fewer moving parts than a diesel or LPG one, so it needs fewer repairs and replacement parts. Electricity costs less than fuel, and there is no fuel to store or handle. Comfort and safety Wide armrests, deep non-slip steps, a thumb-operated direction switch and a power disconnect beside the seat make the work easier, and the steering column tilts. An alarm sounds if the parking brake is not applied, a speed-limiting valve and a shut-off valve protect the hydraulics and the operator, and LED work and warning lights, a seat with a seat belt and puncture-proof solid tyres complete the equipment.

Forklifts

Electric forklift RF25E

The Rippa RF25E is an electric forklift with a 2500 kg rated capacity (500 mm load centre) and a lift height of 3000 mm, with a 5 kW drive motor and a 4 kW hydraulic motor, both AC. A thumb-operated direction switch makes control more precise and reduces hand fatigue, and a power disconnect beside the seat lets the operator cut the power quickly. It is built for warehouses, production halls and logistics centres. Thickened battery wiring Thicker battery cables cut resistance and energy loss, so current flows more efficiently and the power output stays stable. The cables run cooler, which prevents overheating and extends the life of both the wiring and the battery. Mast side rollers The mast uses independent side rollers, so the gap between the mast channels is small: the channels do not wear and the mast does not develop play even after long use. Branded chains carry more than five times the load and come with third-party test reports. LCD instrument panel The smart display shows the operating parameters in real time – the operator and the service technician see the forklift's status at a glance, and a low-battery warning reminds you to recharge. Cylinders with imported seals The hydraulic cylinders use imported seals that seal well and last long: they stop oil leaks, reduce wear and withstand high pressure, heat and corrosion, so the cylinders keep working reliably even in demanding conditions. All-AC drive The drive and hydraulic motors are AC: there are no brushes to inspect or replace, so maintenance costs less, and compared with DC motors they are more efficient, last longer and run longer on one charge. An electric forklift has fewer moving parts than a diesel or LPG one, and electricity costs less than fuel. Comfort and safety Wide armrests and deep non-slip steps make getting on, working and getting off easier, and the steering column tilts. An alarm sounds if the parking brake is not applied, a speed-limiting valve and a shut-off valve protect the hydraulics and the operator, and LED work and warning lights, a seat with a seat belt and puncture-proof solid tyres complete the equipment.