Forklifts

Forklifts

Electric forklift RF15E

The Rippa RF15E is an electric forklift with a 1500 kg rated capacity (500 mm load centre) and a lift height of 3000 mm. Its drive and hydraulic motors are AC, powered by a 60 V battery of five maintenance-free 12 V batteries. It runs quietly with no exhaust fumes, and at 2200 mm long without forks and with a 2300 mm turning radius it moves easily through warehouses, production halls and logistics centres. Thickened battery wiring Thicker battery cables cut resistance and energy loss, so current flows more efficiently and the power output stays stable. The cables run cooler, which prevents overheating and extends the life of both the wiring and the battery. Reinforced mast made by Rippa The high-precision reinforced mast, made in Rippa's own factory, is stronger and more stable, so the forklift works reliably even with heavy loads. Loads rise smoothly without swaying, which improves safety and productivity, and branded chains carry more than five times the load and come with third-party test reports. LCD instrument panel The smart display shows the operating parameters in real time – the operator and the service technician see the forklift's status at a glance, and a low-battery warning reminds you to recharge. Cylinders with imported seals The hydraulic cylinders use imported seals that seal well and last long: they stop oil leaks, reduce wear and withstand high pressure, heat and corrosion, so the cylinders keep working reliably even in demanding conditions. All-AC drive The drive and hydraulic motors are AC: there are no brushes to inspect or replace, so maintenance costs less, and compared with DC motors they are more efficient, last longer and run longer on one charge. An electric forklift has fewer moving parts than a diesel or LPG one, and electricity costs less than fuel. Comfort and safety Wide armrests, deep non-slip steps, a thumb-operated direction switch and a power disconnect beside the seat make the work easier, and the steering column tilts. An alarm sounds if the parking brake is not applied, a speed-limiting valve and a shut-off valve protect the hydraulics and the operator, and LED work and warning lights, a seat with a seat belt and puncture-proof solid tyres complete the equipment.

Forklifts

Electric forklift RF20E

The Rippa RF20E is an electric forklift with a 2000 kg rated capacity (500 mm load centre) and a lift height of 3000 mm. Its 4 kW drive and hydraulic motors are AC: brushless, they use less energy and run longer on one charge of the 60 V battery without losing performance. Quiet and free of exhaust fumes, it suits logistics, warehousing and industrial production. Thickened battery wiring Thicker battery cables cut resistance and energy loss, so current flows more efficiently and the power output stays stable. The cables run cooler, which prevents overheating and extends the life of both the wiring and the battery. Mast side rollers The mast uses independent side rollers, so the gap between the mast channels is small: the channels do not wear and the mast does not develop play even after long use. Branded chains carry more than five times the load and come with third-party test reports. LCD instrument panel The smart display shows the battery charge and reminds you to recharge in time, monitors the travel speed to keep the forklift within a safe range, and shows an error code when a fault occurs – troubleshooting is faster and downtime shorter. Cylinders with imported seals The imported cylinder seals withstand high pressure, heat and corrosion, so the cylinders keep working steadily even under intensive use. This lowers maintenance costs and raises the forklift's working capacity in logistics, warehousing and manufacturing. Lower running costs An electric forklift has fewer moving parts than a diesel or LPG one, so it needs fewer repairs and replacement parts. Electricity costs less than fuel, and there is no fuel to store or handle. Comfort and safety Wide armrests, deep non-slip steps, a thumb-operated direction switch and a power disconnect beside the seat make the work easier, and the steering column tilts. An alarm sounds if the parking brake is not applied, a speed-limiting valve and a shut-off valve protect the hydraulics and the operator, and LED work and warning lights, a seat with a seat belt and puncture-proof solid tyres complete the equipment.

Forklifts

Electric forklift RF25E

The Rippa RF25E is an electric forklift with a 2500 kg rated capacity (500 mm load centre) and a lift height of 3000 mm, with a 5 kW drive motor and a 4 kW hydraulic motor, both AC. A thumb-operated direction switch makes control more precise and reduces hand fatigue, and a power disconnect beside the seat lets the operator cut the power quickly. It is built for warehouses, production halls and logistics centres. Thickened battery wiring Thicker battery cables cut resistance and energy loss, so current flows more efficiently and the power output stays stable. The cables run cooler, which prevents overheating and extends the life of both the wiring and the battery. Mast side rollers The mast uses independent side rollers, so the gap between the mast channels is small: the channels do not wear and the mast does not develop play even after long use. Branded chains carry more than five times the load and come with third-party test reports. LCD instrument panel The smart display shows the operating parameters in real time – the operator and the service technician see the forklift's status at a glance, and a low-battery warning reminds you to recharge. Cylinders with imported seals The hydraulic cylinders use imported seals that seal well and last long: they stop oil leaks, reduce wear and withstand high pressure, heat and corrosion, so the cylinders keep working reliably even in demanding conditions. All-AC drive The drive and hydraulic motors are AC: there are no brushes to inspect or replace, so maintenance costs less, and compared with DC motors they are more efficient, last longer and run longer on one charge. An electric forklift has fewer moving parts than a diesel or LPG one, and electricity costs less than fuel. Comfort and safety Wide armrests and deep non-slip steps make getting on, working and getting off easier, and the steering column tilts. An alarm sounds if the parking brake is not applied, a speed-limiting valve and a shut-off valve protect the hydraulics and the operator, and LED work and warning lights, a seat with a seat belt and puncture-proof solid tyres complete the equipment.

Forklifts

Electric forklift RF30E

The Rippa RF30E is an electric forklift with a 3000 kg rated capacity (500 mm load centre) and a lift height of 3000 mm. Its 7.5 kW drive motor and 5 kW hydraulic motor are AC: brushless, they work more efficiently, last longer and run longer on one charge of the 60 V battery than DC motors. Quiet and free of exhaust fumes, it suits warehouses, production plants and logistics centres. Thickened battery wiring Thicker battery cables cut resistance and energy loss, so current flows more efficiently and the power output stays stable. The cables run cooler, which prevents overheating and extends the life of both the wiring and the battery. Mast side rollers Independent side rollers make the mast more stable and reliable in operation: the gap between the mast channels is smaller, the channels wear less and the forklift lasts longer. Even after long, intensive use the mast does not develop play, so the work stays smoother and safer. LCD instrument panel The smart display shows the battery charge and reminds you to recharge in time, monitors the travel speed to keep the forklift within a safe range, and shows an error code when a fault occurs – troubleshooting is faster and downtime shorter. Semi-enclosed seat The semi-enclosed seat absorbs vibration well, so the operator takes fewer jolts and tires less over long shifts. The cushion adjusts with a dial, and the seat belt retracts on its own. Lower running costs An electric forklift has fewer moving parts than a diesel or LPG one, so it needs fewer repairs and replacement parts. Electricity costs less than fuel, and there is no fuel to store or handle. Comfort and safety Wide armrests, deep non-slip steps, a thumb-operated direction switch and a power disconnect beside the seat make the work easier, and the steering column tilts. An alarm sounds if the parking brake is not applied, a speed-limiting valve and a shut-off valve protect the hydraulics and the operator, and LED work and warning lights and puncture-proof solid tyres complete the equipment.

Forklifts

Electric forklift RF35E

The Rippa RF35E is an electric forklift with a 3500 kg rated capacity (500 mm load centre) and a lift height of 3000 mm – the strongest of the electric series, with 10 kW AC drive and hydraulic motors. Wide, textured armrests give good support and reduce fatigue over long shifts, and deep non-slip steps make getting on and off safe. It is built for warehouses, production plants and logistics centres. Thickened battery wiring Thicker battery cables cut resistance and energy loss, so current flows more efficiently and the power output stays stable. The cables run cooler, which prevents overheating and extends the life of both the wiring and the battery. Mast side rollers Independent side rollers make the mast more stable and reliable in operation: the gap between the mast channels is smaller and there is much less friction between channels and rollers, so the channels wear less and the forklift lasts longer. Even after long, intensive use the mast does not develop play, so the work stays smoother and safer. LCD instrument panel The smart display shows the battery charge and reminds you to recharge in time, monitors the travel speed to keep the forklift within a safe range, and shows an error code when a fault occurs – troubleshooting is faster and downtime shorter. Semi-enclosed seat The semi-enclosed seat absorbs vibration well, so the operator takes fewer jolts and tires less over long shifts. The cushion adjusts with a dial, and the seat belt retracts on its own. All-AC drive The drive and hydraulic motors are AC: there are no brushes to inspect or replace, so maintenance costs less, and compared with DC motors they are more efficient, last longer and run longer on one charge. An electric forklift has fewer moving parts than a diesel or LPG one, and electricity costs less than fuel. Safety An alarm sounds if the parking brake is not applied, the direction switch sits under the steering wheel within a finger's reach, and a speed-limiting valve and a shut-off valve protect the hydraulics and the operator. LED work and warning lights, a smaller steering wheel for a better view of the fork tips and puncture-proof solid tyres complete the equipment.

Forklifts

Lithium-ion forklift RF20L

The Rippa RF20L is an electric forklift with a lithium-ion battery, a 2000 kg rated capacity (500 mm load centre), a 3000 mm lift height and a 2224 mm turning radius. The battery needs no maintenance, charges fast and uses energy efficiently, and the forklift runs quietly with no exhaust fumes. Wide, textured armrests, deep non-slip steps, a thumb-operated direction switch, a power disconnect beside the seat, a storage area on the hood and an adjustable steering column reduce operator fatigue. Ergonomic operator seat The high-back seat with contoured padding reduces fatigue over long shifts, and an integrated retractable seat belt adds safety. The material is weather-resistant, and the wrap-around support holds the operator steady in the seat. Heavy-duty drive axle The reinforced drive axle and sturdy chassis, with a heavy-duty differential housing and precise hydraulic lines, carry maximum loads with ease and give the stability and traction needed in demanding industrial settings. Lithium-ion battery and controller The maintenance-free lithium-ion battery pack works with an advanced electronic controller, while cooling fans and heavy-duty wiring keep the temperature in check and distribute the power evenly. The battery charges fast and uses energy efficiently. Smart LCD display The digital display shows the battery percentage, speed (km/h) and operating hours in real time, and the forklift starts with an NFC card. The operator sees the machine's status at a glance, and the owner manages the fleet more easily.

Forklifts

Lithium-ion forklift RF25L

The Rippa RF25L is an electric forklift with a lithium-ion battery, a 2500 kg rated capacity (500 mm load centre), a 3000 mm lift height and a 2224 mm turning radius. The battery needs no maintenance, charges fast and uses energy efficiently, and the forklift runs quietly with no exhaust fumes. Wide, textured armrests, deep non-slip steps, a thumb-operated direction switch, a power disconnect beside the seat, a storage area on the hood and an adjustable steering column reduce operator fatigue. Heavy-duty drive axle The reinforced drive axle and sturdy chassis, with a heavy-duty differential housing and precise hydraulic lines, carry maximum loads with ease and give the stability and traction needed in demanding industrial settings. Lithium-ion battery and controller The maintenance-free lithium-ion battery pack works with an advanced electronic controller, while cooling fans and heavy-duty wiring keep the temperature in check and distribute the power evenly. The battery charges fast and uses energy efficiently. Smart LCD display The digital display shows the battery percentage, speed (km/h) and operating hours in real time, and the forklift starts with an NFC card. The operator sees the machine's status at a glance, and the owner manages the fleet more easily. Ergonomic operator seat The high-back seat with contoured padding reduces fatigue over long shifts, and an integrated retractable seat belt adds safety. The material is weather-resistant, and the wrap-around support holds the operator steady in the seat.

Forklifts

Lithium-ion forklift RF30L

The Rippa RF30L is an electric forklift with a lithium-ion battery, a 3000 kg rated capacity (500 mm load centre), a 3000 mm lift height and a 2324 mm turning radius. The battery needs no maintenance, charges fast and uses energy efficiently, and the forklift runs quietly with no exhaust fumes. Wide, textured armrests, deep non-slip steps, a thumb-operated direction switch, a power disconnect beside the seat, a storage area on the hood and an adjustable steering column reduce operator fatigue. Lithium-ion battery and controller The maintenance-free lithium-ion battery pack works with an advanced electronic controller, while cooling fans and heavy-duty wiring keep the temperature in check and distribute the power evenly. The battery charges fast and uses energy efficiently. Smart LCD display The digital display shows the battery percentage, speed (km/h) and operating hours in real time, and the forklift starts with an NFC card. The operator sees the machine's status at a glance, and the owner manages the fleet more easily. Ergonomic operator seat The high-back seat with contoured padding reduces fatigue over long shifts, and an integrated retractable seat belt adds safety. The material is weather-resistant, and the wrap-around support holds the operator steady in the seat. Heavy-duty drive axle The reinforced drive axle and sturdy chassis, with a heavy-duty differential housing and precise hydraulic lines, carry maximum loads with ease and give the stability and traction needed in demanding industrial settings.

Forklifts

Lithium-ion forklift RF35L

The Rippa RF35L is an electric forklift with a lithium-ion battery, a 3500 kg rated capacity (500 mm load centre), a 3000 mm lift height and a 2324 mm turning radius. The battery needs no maintenance, charges fast and uses energy efficiently, and the forklift runs quietly with no exhaust fumes. Wide, textured armrests, deep non-slip steps, a thumb-operated direction switch, a power disconnect beside the seat, a storage area on the hood and an adjustable steering column reduce operator fatigue. Lithium-ion battery and controller The maintenance-free lithium-ion battery pack works with an advanced electronic controller, while cooling fans and heavy-duty wiring keep the temperature in check and distribute the power evenly. The battery charges fast and uses energy efficiently. Smart LCD display The digital display shows the battery percentage, speed (km/h) and operating hours in real time, and the forklift starts with an NFC card. The operator sees the machine's status at a glance, and the owner manages the fleet more easily. Heavy-duty drive axle The reinforced drive axle and sturdy chassis, with a heavy-duty differential housing and precise hydraulic lines, carry maximum loads with ease and give the stability and traction needed in demanding industrial settings. Ergonomic operator seat The high-back seat with contoured padding reduces fatigue over long shifts, and an integrated retractable seat belt adds safety. The material is weather-resistant, and the wrap-around support holds the operator steady in the seat.

Forklifts

Diesel forklift RF25

The Rippa RF25 is a diesel forklift with a 2500 kg rated capacity (500 mm load centre) and a 3000 mm lift height, powered by a Changchai 390 engine – 18.4 kW in its Euro V version or 22.1 kW as Euro III. Mirrors, work lights and a reinforced mast add safety and convenience, and the stable structure keeps the forklift steady even at full load. Reliable and durable, it suits logistics, warehousing and manufacturing. Multi-cylinder water-cooled diesel engine A large multi-blade fan at the front of the engine, belt-driven, keeps the engine at its ideal operating temperature even during long periods under heavy load. High-performance hydraulic cylinders With a high-quality sealing system and precision-machined parts, the cylinders carry heavy loads and push and pull smoothly. The seals come from Japan's NOK. High-strength mast Made of high-strength steel with a reinforced structure, the mast is very rigid and resists twisting and bending, so it stays stable under heavy loads. Independent side rollers keep the gap between the channels small, and branded chains carry more than five times the load. Reliable and easy to service A sturdy structure and a well-planned service layout cut downtime: the engine hood opens wide and locks, the floor plate comes off completely, and the filters and radiator are easy to reach and clean. The main hydraulic connections use O-ring face seals and the electrics waterproof connectors. Fuel-saving hydraulics Hydraulics taken from Rippa's construction machinery, with a load-sensing variable-displacement pump, supply only as much oil as the job needs – no losses and no extra load on the engine. Loads can be raised precisely even at low engine speed, attachments run smoothly and fuel consumption drops by up to 20% (Rippa's measurements). Brakes and steering The hydraulic brakes stop powerfully, quickly and smoothly, and Rippa's cushioning valve matches the braking force to the pressure on the pedal, giving the operator better control. Fully hydrostatic power steering with a small steering wheel works even at standstill and makes manoeuvring with a load in tight spaces easy. Safety and comfort An alarm sounds if the parking brake is not applied, the engine starts only with the direction switch in neutral and the brake pedal pressed, and the overhead guard meets ANSI/ITSDF B56.1. A dual floating mounting absorbs vibration from the engine and the ground, the full-suspension seat has a retractable seat belt, and the exhaust and the radiator's hot air are directed away from the operator. A wide-angle centre mirror is optional.

Forklifts

Diesel forklift RF20

The Rippa RF20 is a diesel forklift with a 2000 kg rated capacity (500 mm load centre) and a 3000 mm lift height, powered by a Changchai 390 engine – 18.4 kW in its Euro V version or 22.1 kW as Euro III. A shorter wheelbase makes it more agile than the larger models while keeping their power and speed. Mirrors, work lights and a reinforced mast add safety and convenience, and the stable structure keeps the forklift steady even at full load – for logistics, warehousing and manufacturing. Multi-cylinder water-cooled diesel engine A large multi-blade fan at the front of the engine, belt-driven, keeps the engine at its ideal operating temperature even during long periods under heavy load. High-performance hydraulic cylinders With a high-quality sealing system and precision-machined parts, the cylinders carry heavy loads and push and pull smoothly. The seals come from Japan's NOK. Wiring harness The wiring harness carries sensor signals – oil pressure and coolant temperature – to the control unit and delivers its commands to the electronic fuel injectors. High-strength mast Made of high-strength steel with a reinforced structure, the mast is very rigid and resists twisting and bending, so it stays stable under heavy loads. Independent side rollers keep the gap between the channels small, and branded chains carry more than five times the load. Fuel-saving hydraulics Hydraulics taken from Rippa's construction machinery, with a load-sensing variable-displacement pump, supply only as much oil as the job needs – no losses and no extra load on the engine. Loads can be raised precisely even at low engine speed, attachments run smoothly and fuel consumption drops by up to 20% (Rippa's measurements). Brakes and steering The hydraulic brakes stop powerfully, quickly and smoothly, and Rippa's cushioning valve matches the braking force to the pressure on the pedal, giving the operator better control. Fully hydrostatic power steering with a small steering wheel works even at standstill and makes manoeuvring with a load in tight spaces easy. Safety and comfort An alarm sounds if the parking brake is not applied, the engine starts only with the direction switch in neutral and the brake pedal pressed, and the overhead guard meets ANSI/ITSDF B56.1. A dual floating mounting absorbs vibration from the engine and the ground, the full-suspension seat has a retractable seat belt, and the exhaust and the radiator's hot air are directed away from the operator. A wide-angle centre mirror is optional. Easy servicing The engine hood opens wide and locks, the floor plate comes off completely, and the filters and radiator are easy to reach and clean. The main hydraulic connections use O-ring face seals and the electrics waterproof connectors; hydraulic and electrical lines run separately for reliability and easier servicing.

Forklifts

Diesel forklift RF50

The Rippa RF50 is a diesel forklift with a 5000 kg rated capacity and a 3000 mm lift height – the strongest of the RF series, built for heavy loads in warehousing, manufacturing and logistics. Two engines are available: a 61 kW 4D35ZG31 or a 60 kW Cummins. Powerful engine The 61 kW 4D35ZG31 or the 60 kW Cummins engine gives ample power for efficient work with loads of up to 5 tonnes.